Do you seem to have an immersion heater that is not working as well as it use to? If so you may be thinking of replacing the whole unit however there is not need to replace the whole unit as the problem may one be in your immersion heater element. By only replacing the element you may be able to get your heater working the way it is suppose to. There are many reasons why an immersion heater element may fail.

However the most common reason is that it has been constantly used for a long period. Depending on the mineral content of the water in your area the element may become coated with calcium, lime or many other minerals. When these coat your element, the heat will not be able to transfer to the water as effectively, and can lead to the element having a shorter than normal life span. Another reason that your immersion heater element may not be working is that the control unit may have gone out.

When this happens there is nothing there to control when the element turns on or off. If the control unit fails to work the element may not be turning on like it is suppose to resulting in the loss of heat in the liquid you are trying to keep warm. One more reason your immersion heater element may not be working is that it may just be old. The older the element gets the more likely it is to go out. Elements have what is called a lifespan and each design of element may have a different lifespan. Depending on the type of use they receive this life span can be either shorter or longer than expected. If you find that your element is nearing the end of its lifespan you may want to consider checking it to make sure that it is still working the way it should it. If you find that your immersion heater element is not quite working right it may be time to replace it. It is easy to find companies that sell different elements however not all companies may sell the design of element that you may need for your immersion heater.

Since these designs can be different and unique you may have an easier time finding the right design at a company that specializes in these types of heating elements. If you a bad immersion heating element and have not been able to find the right replacement you may want to look into Wattco. This company has been in the element industry since 1969 and is sure to have the exact design of element that you may be looking for. With the knowledgeable staff this company has they have been helping people like you find solutions to their heating problems. So if you have not been able to find the correct heating element you can be sure that this company and their expert staff will be able to help you get your immersion heater up and going again.